Diagram of SETP_Label_V23 Pick to Light Device Rear Interface and Power Requirements
① Negative GND:
This is the grounding interface of the device, used to connect the negative terminal or ground wire. Grounding is essential in electronic devices as it ensures safe operation and stable signal performance.
② I/O / 0.3V:
This interface may be used for input/output signals and is labeled with a voltage level of 0.3V. This means that any connected device or signal source must be compatible with a 0.3V logic level.
However, the “/” between “I/O” and “0.3V” may indicate that this is a multifunctional port or has a specific usage mode, which should be confirmed in the device’s detailed manual.
③ Output 3.3V Positive ≤100mA:
This interface provides a 3.3V output with a maximum current limit of 100mA.
Devices or components connected to this port must be compatible with 3.3V voltage and operate within a current limit of 100mA.
④ Input 24V Positive:
This interface serves as the 24V DC power input for the device. It is used to connect an external 24V power supply. Ensure that the connection is made correctly to provide the necessary operating power for the device.
